Pass Guaranteed 2025 Juniper High-quality JN0-664: Service Provider, Professional (JNCIP-SP) Training Kit
The industry experts hired by JN0-664 study materials explain all the difficult-to-understand professional vocabularies easily. All the languages used in JN0-664 real exam were very simple and easy to understand. With our JN0-664 study guide, you don't have to worry about that you don't understand the content of professional books. You also don't need to spend expensive tuition to go to tutoring class. JN0-664 Practice Engine can help you solve all the problems in your study.
As a JNCIP-SP certified professional, you will be able to demonstrate your expertise in the field of service provider networking technologies. Service Provider, Professional (JNCIP-SP) certification is highly respected in the industry and is recognized by many organizations globally. It can open up new career opportunities for you and help you advance your career.
The JN0-664 Exam covers a wide range of topics related to service provider routing and switching, including advanced routing protocols, MPLS, Layer 2 and Layer 3 VPNs, BGP, multicast, and high availability. JN0-664 exam consists of 65 multiple-choice questions and has a time limit of 120 minutes. Candidates must achieve a passing score of 65% or higher to earn their certification. The JNCIP-SP certification is valid for three years, after which candidates must recertify by passing an exam or completing a specified number of continuing education credits. Earning this certification demonstrates a high level of expertise in service provider routing and switching and can open up new career opportunities in the networking industry.
Juniper JN0-664: Service Provider, Professional (JNCIP-SP) exam is designed for professionals who want to enhance their skills and knowledge in the field of service provider technologies. Service Provider, Professional (JNCIP-SP) certification is a proof of the skills and knowledge that a candidate possesses in configuring and troubleshooting service provider routing technologies and implementing service provider VPN solutions.
JN0-664 Reliable Test Sample - Premium JN0-664 Exam
n modern society, whether to obtain JN0-664 certification has become a standard to test the level of personal knowledge. Many well-known companies require the JN0-664 certification at the time of recruitment. Whether you're a student or a white-collar worker, you're probably trying to get the certification in order to get more job opportunities or wages. If you are one of them, our JN0-664 Exam Guide will effectively give you a leg up.
Juniper Service Provider, Professional (JNCIP-SP) Sample Questions (Q23-Q28):
NEW QUESTION # 23
You are responding to an RFP for a new MPLS VPN implementation. The solution must use LDP for signaling and support Layer 2 connectivity without using BGP. The solution must be scalable and support multiple VPN connections over a single MPLS LSP. The customer wants to maintain all routing for their private network.
In this scenario, which solution do you propose?
Answer: B
NEW QUESTION # 24
Exhibit
You want to implement the BGP Generalized TTL Security Mechanism (GTSM) on the network Which three statements are correct in this scenario? (Choose three)
Answer: B,D,E
Explanation:
https://www.juniper.net/documentation/us/en/software/junos/bgp/topics/ref/statement/multihop-edit-protocols-bg
NEW QUESTION # 25
Click the Exhibit button.
Referring to the exhibit, which two statements are correct regarding the output shown in the exhibit? (Choose two.)
Answer: C,D
Explanation:
In the provided exhibit, the output of the `show pim join extensive 232.1.1.1` command is shown. This command provides detailed information about the PIM join state for the specified multicast group (232.1.1.1) on the router R1. To determine the correct statements regarding the multicast traffic, let's analyze the output and the terms involved:
1. **ASM vs. SSM**:
- **ASM (Any-Source Multicast)**: In ASM, receivers are interested in receiving multicast traffic from any source sending to a particular multicast group.
- **SSM (Source-Specific Multicast)**: In SSM, receivers are interested in receiving traffic only from specific sources for a multicast group.
- **Group Address Range**:
- ASM uses the range 224.0.0.0 to 239.255.255.255.
- SSM uses the range 232.0.0.0 to 232.255.255.255.
Since the group address 232.1.1.1 falls within the SSM range (232.0.0.0/8), there might be confusion.
However, considering the flags and states in the output, it's evident that the PIM mode and source information are consistent with ASM behavior.
2. **Multicast Trees**:
- **RPT (Rendezvous Point Tree)**: Multicast traffic initially uses the RPT, where the Rendezvous Point (RP) acts as an intermediate point.
- **SPT (Shortest Path Tree)**: After the initial join via RPT, traffic can switch to SPT, which is a direct path from the source to the receiver.
3. **Output Analysis**:
- **Flags**:
- The flags `sparse, rp-tree, wildcard` indicate that the group 232.1.1.1 is currently using RPT. This is typical for ASM, where traffic initially goes through the RP.
- The flags `sparse, spt` indicate that for the source 172.16.1.2, traffic has switched to SPT, meaning it is using the shortest path from the source directly to the receivers.
**Conclusion**:
Based on the analysis:
- **A. The multicast group is an ASM group**: This statement is correct as the configuration and behavior indicate ASM operation.
- **B. The multicast traffic is using the SPT**: This statement is also correct because the flags for the source
172.16.1.2 indicate that the traffic is using the SPT.
Thus, the correct answers are:
**A. The multicast group is an ASM group.**
**B. The multicast traffic is using the SPT.**
**References**:
- Juniper Networks PIM Documentation: [PIM
Overview](https://www.juniper.net/documentation/en_US/junos/topics/concept/pim-overview.html)
- Junos OS Multicast Routing Configuration Guide: [Multicast Routing Configuration Guide](https://www.juniper.net/documentation/en_US/junos/topics/topic-map/multicast-routing.html)
NEW QUESTION # 26
Exhibit
You are running a service provider network and must transport a customer's IPv6 traffic across your IPv4- based MPLS network using BGP You have already configured mpis ipv6-tunneling on your PE routers.
Which two statements are correct about the BGP configuration in this scenario? (Choose two.)
Answer: A,C
Explanation:
To transport IPv6 traffic over an IPv4-based MPLS network using BGP, you need to configure two address families: family inet6 labeled-unicast and family inet6 unicast. The former is used to exchange IPv6 routes with MPLS labels between PE routers, and the latter is used to exchange IPv6 routes without labels between PE and CE routers. The mpis ipv6-tunneling command enables the PE routers to encapsulate the IPv6 packets with an MPLS label stack and an IPv4 header before sending them over the MPLS network.
NEW QUESTION # 27
Which two statements are correct about VPLS tunnels? (Choose two.)
Answer: C,D
Explanation:
https://www.juniper.net/documentation/us/en/software/nce/feature-guide-virtual-private-lan-service/topics/task
/vpls-ldp-signaling-solutions.html
https://www.juniper.net/documentation/us/en/software/junos/vpn-l2/topics/concept/vpns-configuring-vpls- routing-instances.html#id-11510150__id-11568648
NEW QUESTION # 28
......
Are you still looking for JN0-664 exam materials? Don't worry about it, because you find us, which means that you've found a shortcut to pass JN0-664 certification exam. With research and development of IT certification test software for years, our DumpsReview team had a very good reputation in the world. We provide the most comprehensive and effective help to those who are preparing for the important exams such as JN0-664 Exam.
JN0-664 Reliable Test Sample: https://www.dumpsreview.com/JN0-664-exam-dumps-review.html
© 2024 NXT Nerd. All Rights Reserved
